Table of Contents
Advertisement
November 2008
Model
Serial number
Date
Hour meter
Machine owner
Inspected by
Inspector signature
Inspector title
Inspector company
Instructions:
- Make copies of this page to use for each
inspection.
- Select the appropriate checklist(s) for the
type of inspection to be performed.
Every 10 hours:: A
Every 50 hours:: A+B
Every 250 hours:: A+B+C
Every 500 hours:: A+B+C+D
Every 1000 hours:: A+B+C+D+E
Every 2000 hours:: A+B+C+D+E+F
At 6000 hours: G
- Place a check in the appropriate box
after each inspection procedure is
completed.
- Use the maintenance tables in this
section and the step-by-step procedures
in section 4 to learn how to perform
these inspection.
- If any inspection receives an "N", tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend:
Y = yes, acceptable
N = no, remove from service
R = repaired.
Document 57.0009.0427
GTH-4017EX GTH-4514EX GTH-4013EX
Section 3 - Maintenance Inspections
Table E
Every 1000 working hours:
E-1
Safety element of engine air
filter
E-2
Power divider gearbox oil
E-3
Four wheel reduction gears oil
E-4
Hydraulic oil and hydraulic oil
filter
Table F
Every 2000 working hours:
F-1
Change the engine coolant
Table G
At 6000 working hours:
G-1
Checking the state of the
structure
MAINTENANCE INSPECTIONS
Y N R
Y N R
Y N R
7
Advertisement
Table of Contents
