Fork Lift Attachment - Terex TL80 Operating Instructions Manual

3 Technical data

3.15 Fork lift attachment

Fork-arm connection in compliance with ISO/FEM Class 2 Form B, DIN 15 173 / ISO 2328 respectively
Width of fork carrier
Length of forks
Fork cross section
Max. stacking height
The payloads are determined in compliance with DIN 24094 / ISO 14397-1 respectively with a stability factor
of 1.25 or 80% of the tipping load and the machine moving over level ground.
The payloads are valid for the machine fitted with 405/70 R 18 SPT9 tires and the equipment condition as
described in compliance with ISO 6016.
Total lift range
500mm
19,7inch
+0,5bar
+7,3psi
Transport position
500mm
19,7inch
+0,5bar
+7,3psi
If screw-on rear axle weights or rear tires with hydroinflation are used.
kg
lbs
During fork lift operations, the tire pressure of the front wheels must be increased by at least
0.5 bar.
34
kg
+
lbs
kg
+
lbs
mm 1,240
mm 1,100
mm 100x45
mm 3,070
kg
lbs
kg
kg
lbs
lbs
kg
lbs
kg
lbs
kg
kg
lbs
lbs
kg
lbs
S=2.0 S=1.25
1,280 2,050
2,820 4,520
1,400 2,250
3,100 4,960
S=1.67 S=1.25
1,720 2,300
3,790 5,060
1,870 2,500
4,120 5,500
TL80