Table of Contents
Advertisement
November 2008
4.1
INTRODUCTION
•
Maintenance inspections shall be completed by a
trained and qualified person on the maintenance
of this machine.
•
Scheduled maintenance must be carried out at
the intervals indicated in the MAINTENANCE
REPORT.
WARNING
Failure to properly complete each inspection
when required may cause death, serious injury
or substantial machine damage.
•
Immediately tag and remove from service a da-
maged or malfunctioning machine.
•
Immediately tag and remove from service a da-
maged or malfunctioning machine.
•
Unless
otherwise
procedure with the machine in the following
configuration:
-
machine parked on a flat level surface;
-
boom in the stowed position;
-
key switch in the OFF position with the key
removed.
Document 57.0009.0427
specified,
perform
GTH-4017EX GTH-4514EX GTH-4013EX
Maintenance Procedures
each
Section 4 - Maintenance Procedures
1
Advertisement
Table of Contents
