Bucket Positioning; Electric Attachment Control; Auto Idle - Terex PT-110 F Operation And Maintenance Manual

4 MACHINE DESCRIPTION / CONTROLS
4.8 Bucket Positioning (optional)
The PT-110 machines are equipped with feature commonly referred to as "bucket
positioning". The bucket positioning system does not automatically level your
attachment. Instead, it will maintain the current angle of the quick attach (relative
to level) throughout the upward cycle of the lift arms.
The bucket positioning feature can be turned on or off with the switch located on
the side console (item 14, section 4.1 ).
Note: The bucket positioning function can be overridden by operating the curl or
dump functions of the appropriate joystick.

4.9 Electric Attachment Control

4.9-1
Attachments for the PT-110 are controlled by pressing various buttons on the joy-
sticks or switches in the cab. Most attachments are controlled hydraulically, but
some require both hydraulic and electrical inputs. The upper 4 buttons on the left
joystick (4.9-1) can send up to 20 amps (combined) of electrical current to pins B,
C, D, G of the receptacle on the lift arms (4.9-1). Attachments requiring electrical
inputs must have a matching receptacle.
Note: The electrical receptacle is not compatible with all attachment brands. Use
only compatible attachments for proper function (see section 4.13).

4.10 Auto Idle

The PT-110 machines are equipped with a feature called Auto Idle. When activat-
ed the feature causes the machine to idle down to conserve fuel when it is not
commanded to do work through the various controls and switches for 5 seconds.
This feature can be enabled or disabled through the config menu found in the
operator interface section of this chapter.
PT-110/PT-110F US O&M
43
2095-479 2013-02