Section 4 - Maintenance Procedures
TABLE A
A-3
CHECK THE TIGHTENING OF ALL BOLTS
AND NUTS
Before starting your daily work, proceed with a random
check of the bolts.
For the correct tightening torques, please refer to par.
2.13 in section 2 "Technical Specifications".
6
A-4
Before starting your work, do a walk-around inspection
and check for oil leaks.
If you find them, rectify before starting using the
machine.
GTH-4017EX GTH-4514EX GTH-4013EX
CHECK THE COUPLINGS FOR OIL LEAKS
November 2008
Document 57.0009.0427