Table of Contents
Advertisement
November 2008
Problems
The flashing beacon doesn't
work
The heating fan doesn't work.
The limit switch sensing doesn't
work when the boom is in the
low position.
The limit switch sensing doesn't
work when the boom is in the
high position.
The air filter restriction warning
light doesn't work.
Document 57.0009.0427
Causes
Flashing beacon damaged.
Flashing beacon lamp damaged.
Problem of the wiring line.
15A F2 fuse blown.
Fan control switch damaged.
Heating fan motor damaged.
Problem of the wiring line.
A5 F3 fuse blown.
Limit switch damaged.
Problem of the wiring line.
A5 F3 fuse blown.
Limit switch damaged.
Problem of the wiring line.
X1 dashboard indicator light.
Filter restriction sensors B6 (GTH
4013EX) B15 (GTH 4017EX - GTH
4514EX) damaged.
Problem of the wiring line.
GTH-4017EX GTH-4514EX GTH-4013EX
Section 5 - Problems-Causes-Solutions
-
PROBLEMS
CAUSES
Solutions
Check the flashing beacon and
replace if necessary.
Check the lamp and replace if
necessary.
Check the wiring for continuity.
Check the fuse and replace if
necessary.
Check the switch and replace if
necessary.
Check the fan motor and replace if
necessary.
Check the wiring for continuity.
Check the fuse and replace if
necessary.
Check the limit switch and replace
if necessary.
Check the wiring for continuity.
Check the fuse and replace if
necessary.
Check the limit switch and replace
if necessary.
Check the wiring for continuity.
Check the indicator light and replace
the lights group if necessary.
Check the sensor and replace if
necessary.
Check the wiring for continuity.
-
SOLUTIONS
7
Advertisement
Table of Contents
