Table of Contents
Advertisement
Section 7 - Repair Procedures
003
TABLE
Procedure:
Removing the engine from the machine
WARNING
Once all operations have been performed make sure
that all the electrical wires and the hydraulic lines are
disconnected from the motor.
18 Remove the four screws (two on the front
and two at the back) of the vibration-damping
brackets with a 22 mm wrench.
19 Sling the engine using a two-leg chain with hook
to be coupled to the two top lugs.
20 Raise the engine with caution and ensure no
parts are still connected.
21 Remove the engine from the machine, rest it on
a wooden pallet and hold it in position with some
plugs.
Reassembling the engine:
CAUTION
To reassemble the engine, repeat the steps above
in reversed order considering the precautions
below.
Handle the engine with extreme caution to
prevent it from crashing against the machine
14
GTH-4017EX GTH-4514EX GTH-4013 EX
18
19
November 2008
003
Table:
GTH-4017EX
GTH-4514EX
GTH-4013EX
Document 57.0009.0427
Advertisement
Table of Contents
