Electric Attachment Control; Bucket Positioning - Terex TSV-70 Operation And Maintenance Manual

4 MACHINE DESCRIPTION / CONTROLS
4.8-1
4.8-2

4.8 Electric Attachment Control

Attachments for the TSV are controlled by pressing various buttons on the
machines joysticks. Most attachments are controlled hydraulically, but some
require both hydraulic and electrical inputs. The 4 buttons on the left joystick
(4.8-1) send electrical current to the receptacle on the lift arms (4.8-2). Approved
attachments that require electrical inputs have a matching receptacle.
Note: The electrical receptacle is not necessarily compatible with other brands.
Use only approved attachments for proper function.
4.9 Bucket Positioning (optional)
The TSV machines can be equipped with feature commonly referred to as "bucket
positioning". The bucket positioning system does not automatically level your
attachment. Instead, it will maintain the current angle of the quick attach (relative
to level) throughout the upward cycle of the lift arms.
The bucket positioning feature can be turned on or off with the switch located on
the dash panel (item 4, section 4.1 ).
Note: During the upward cycle, the bucket positioning function can be overridden
by operating the tilt or curl functions of the joystick.
Note: The bucket positioning feature works on the upward cycle only. The opera-
tor must position the attachment manually on the downward cycle.
45