Table of Contents
Advertisement
November 2008
E-2
CHANGE THE OIL IN THE POWER DIVIDER
GEARS
To change the oil in the power divider gears:
-
Stop the machine on a level ground and engage the
parking brake.
PROTECT THE
ENVIRONMENT
Place a container of suitable size under the plug for
oil leaks.
-
Remove the plug A.
-
Remove the plug B and allow the oil to flow
entirely.
-
Refit and tighten the plug B.
-
Add new oil through the hole A until it is level with
hole
-
Refit and tighten A.
Recommended oil:
- TRACTORENAULT THFI 208 LF SAE 80W
API GL-4 / FORD M2C 86 B / Massey Ferguson M
1135
Document 57.0009.0427
A
B
GTH-4017EX GTH-4514EX GTH-4013EX
Section 4 - Maintenance Procedures
E-3
CHANGE THE OIL IN THE FOUR WHEEL
REDUCTION GEARS
To change the oil in the four wheel reduction gears:
-
Stop the machine on a level ground and ensure the
parking brake is engaged and plug A is oriented along
the vertical axis.
PROTECT THE
ENVIRONMENT
Place a container of suitable size under the plug for
oil leaks.
-
Remove the plug A and allow the oil to flow entirely
from the reduction.
-
Rotate the wheel by 90° until the plug is oriented
along the horizontal axis.
-
Add new oil through hole A.
-
Refit and tighten A.
Recommended oil:
- TRACTORENAULT THFI 208 LF SAE 80W
API GL-4 / FORD M2C 86 B / Massey Ferguson M
1135
A
TABLE D
A
53
Advertisement
Table of Contents
