Check The Tyre Inflation - Terex Genie GTH-4017 EX Service Manual

Section 4 - Maintenance Procedures
TABLE B
B-3

CHECK THE TYRE INFLATION

DANGER
Over-inflated or overheated tyres can burst. Do not
flame-cut or weld the wheel rims. For any repair work,
call in a qualified technician.
OK
For the tyre inflation or substitution, please refer to the
table below:
Dimensions (front and rear.)
Load index
Rim
Wheel disc
Pressure bar/Psi
On new machines, and when a wheel has been
disasembled or replaced, check the nut torque of the
wheels every 2 hours until they stay correct.
Torque 400 N/m.
WARNING
Always use tyres having the dimensions indicated
in the vehicle registration card.
28
WRONG
GTH 4013 EX-GTH 4514 EX
Standard - Optional
405/70 R20 - 400/70 R24
14 pr - 14 pr
13x20 - 13X24
8 holes DIN 70361 - 8 fori DIN 70361
5.5/80 - 4.6/65
GTH-4017EX GTH-4514EX GTH-4013EX
November 2008
GTH 4017 EX
405/70 R24
14 pr
13x24
8 holes DIN 70361
4.6/65
Document 57.0009.0427