November 2008
A-14 CHECK THE EFFICENCY OF THE LIGHTING
ELECTRIC SYSTEM
Check every day that the electrical system powering the
lights of the machine is in efficient working order.
Use the assistance of a second technician to check that
the front lights (position lights, low and high beams and
turn signals) and the rear lights (position lights, stop/tail
lights and turn signals) are in excellent state of repair.
Also check beacon located on the cab roof.
If one lamp or more must be replaced, use the table
below as a reference.
Use
•
Front low/high beam
•
Front position lights
•
Side/tail turn signals
•
Stop lights and rear position lights
•
Beacon - Work lights (OPTIONAL)
•
Dashboard indicators and cab lighting
•
Interior lamp
•
License plate lights
•
Back-up lamps
Document 57.0009.0427
GTH-4017EX GTH-4514EX GTH-4013EX
Section 4 - Maintenance Procedures
WARNING
When switched on, lamps get hot. Before touching
a lamp with your fingers, let it cool down.
CAUTION
Never touch the bulb of halogen lamps with your
fingers: this may damage the lamp (use of a clean
cloth or a paper tissue). If you touch it accidentally,
thoroughly clean with a paper tissue and some ethyl
alcohol.
Voltage
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
4
B
Mount type
P45t
45/40 W
BA 9s
BA 15s
BAY 15d
H3
W 2x4,6d
SV 8,5-8
BA 15s
BA 15s
TABLE A
Power
3 W
21 W
21/5 W
55 W
1,2 W
5 W
5 W
21W
17