Table of Contents
Advertisement
Section 7 - Repair Procedures
012
TABLE
Procedure:
Renewing the slide pads of the telescopic boom
GTH-4017EX GTH-4514EX
6 Refit the fixing screws (torque: 30÷35 Nm) after
pouring some Loctite 495 on their threads.
7 After shimming, fully extend the boom, carefully
clean the sliding rails of the pads, then smear
with a thin coat of grease:
INTERFLON FIN GREASE LS2
THIRD SECTION
Torque:
30÷35 Nm
38
FIRST SECTION
GTH-4017EX GTH-4514EX GTH-4013 EX
FOURTH SECTION
SECOND SECTION
New pad thickness: 15 mm
Max wearing thickness: 6 mm
Minimum thickness: 9 mm
November 2008
012
Table:
GTH-4017EX
GTH-4514EX
GTH-4013EX
Document 57.0009.0427
Advertisement
Table of Contents
