Pna Family Network Analyzer Configurations; Test Set And Power Configuration Options - Keysight PNA-X Series Configuration Manual

PNA Family Network Analyzer Configurations

PNA-X Series
N5249B 900 Hz/10 MHz to 8.5 GHz
N5241B 900 Hz/10 MHz to 13.5 GHz
N5242B 900 Hz/10 MHz to 26.5 GHz
N5244B 900 Hz/10 MHz to 43.5 GHz
N5245B 900 Hz/10 MHz to 50 GHz
N5247B 900 Hz/10 MHz to 67 GHz

Test set and power configuration options

Choose one test set and power configuration option. Option 2xx indicates two test ports. Option 4xx indicates four test ports. To add
options to a product, order the corresponding item number (N52xxB-xxx).
Description Configurable
test set
PNA-X Series
Option 201 ⦁
Option 205 ⦁
Option 217 ⦁
Option 219 ⦁
Option 222 ⦁
1
Option 224 ⦁
1
Option 401 ⦁
1
Option 417 ⦁
1
Option 419 ⦁
1
Option 422 ⦁
1
Option 423 ⦁
1
Option 425 ⦁
1
PNA Series
Option 200
Option 201 ⦁
Option 205 ⦁
Option 210
Option 217 ⦁
Option 219 ⦁
Option 220 ⦁
Option 400
1
Option 401 ⦁
1
Option 405 ⦁
Option 410
1
Option 417 ⦁
1
Option 419 ⦁
1
Option 420 ⦁
PNA-L Series
Option 200
Option 216 ⦁
Option 400
Option 416 ⦁
2
1. To independently control the frequency of the second internal source, one of the following software
applications is required: S93080/029/082/083/084/086/087/089/090x/093/094A, or S94510/511A.
2. Adds one source attenuator to be shared with all test ports.
Find us at www.keysight.com
PNA Series
N5221B 900 Hz/10 MHz to 13.5 GHz
N5222B 900 Hz/10 MHz to 26.5 GHz
N5224B 900 Hz/10 MHz to 43.5 GHz
N5225B 900 Hz/10 MHz to 50 GHz
N5227B 900 Hz/10 MHz to 67 GHz
Source Receiver Bias-tees Internal
attenuators attenuators
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁
⦁
⦁
PNA-L Series
N5239B 300 kHz to 8.5 GHz
N5231B 300 kHz to 13.5 GHz
N5232B 300 kHz to 20 GHz
N5234B 10 MHz to 43.5 GHz
N5235B 10 MHz to 50 GHz
Internal Mechanical
second combiner switches
source
⦁
⦁ ⦁
⦁ ⦁ ⦁
⦁
⦁
⦁ ⦁
⦁ ⦁
⦁ ⦁ ⦁
⦁ ⦁ ⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁ ⦁
⦁ ⦁
Low- Additional information
frequency
extension
(down to
900 Hz)
⦁ only available on N5241B/42B
⦁ Not available on 67 GHz model
⦁
Not available on 67 GHz model
⦁ Not available on 67 GHz model
⦁
⦁ ⦁
⦁ Only available on N5221/22/27B
2-port metrology option
Not available on 67 GHz model
⦁
⦁
4-port metrology option
Not available on 67 GHz model
⦁
Available on only N5231/32B
Available on only N5231/32B
Test Port Connector
3.5 mm (male)
3.5 mm (male)
3.5 mm (male)
2.4 mm (male)
2.4 mm (male)
1.85 mm (male)
Page 5