Disk Drive Removal Procedure - Keysight X Series Security Features And Document Of Volatility

Signal analyzer
Hide thumbs Also See for X Series:
Table of Contents

Advertisement

7

Disk Drive Removal Procedure

This chapter describes the procedures for physical removal of the disk drive
from:
a.
b.
For detailed information about the drive types installed in each instrument
type, see the section
page
T I P
Application License keys are stored in EEPROM on the A7 Midplane Assembly
(as described in Item 3 of
the Disk Drive, you do not need to back up and restore the license keys.
When installing a replacement Disk Drive, ensure that the instrument
software revision on the replacement drive matches that of the original drive.
Instruments with Non-Removable Drives
instruments),
Instruments with Removable Drives
EXA and CXA instruments).
"X-Series Processor and Disk Drive Configurations" on
8, in the Chapter
Products Covered by this
Security Features and Document of Volatility
(generally, older MXA, EXA and CXA
(generally, all PXA instruments, and newer MXA,
Table 4-1 on page
19). Therefore, when replacing
Disk Drive Removal Procedure
Document.
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N9030aN9020aN9010aN9000a

Table of Contents