Table of Contents
Advertisement
Section 19: Glossary
Access Code:
Audio:
Autoclaving:
Autofilming:
Automatic Replenishment Mode: Replenishment solutions are added when an area
Autoprint:
Auxiliary Keypad:
Bilinear Interpolation:
Bin:
5B9615
A 4-digit password which must be entered by a
Service Representative or a key operator to set up
the Processor or to change Processor default
settings.
The Audio menu selection that allows you to
specify a preference for audible feedback from the
Keypad.
Steam cleaning under pressure to sterilize.
Printer control (operations) is accessed through an
imaging device's console or workstation.
of film equivalent to approximately
2
2
1500 cm
(240 in.
) has been processed.
For example, one 35 x 43 cm (14 x 17 in.) sheet of
film.
The autoprint option allows you to specify that a
page should be sent to the print queue
automatically when the page format has been
filled with images.
Optional Keypad which can be used when an
autofilming imaging device is connected to the
Laser Printer. It provides additional functions over
what is available through the imaging device
console autofilming link.
A method which uses the 4 bordering pixels (top,
bottom, left and right) to create a new pixel that
results in smoother edges of the images.
Located on the Sorter for the 180 LP or 180 LPS
Processor, there are 9 Bins for collating films.
Each Bin is identified with a number and a
customer-written label naming the imaging device
assigned to it.
Glossary
19–1
Advertisement
Chapters
Table of Contents
Troubleshooting
