User's Manual
[10] Install the Wash Rack, Crossover Assemblies, and Wet Section Cover in the
correct positions in the Processor, and check that each Assembly seats firmly.
Looking closely at the following illustrations and the front ends of the Racks, you
will notice that there are letters on the Washers. The letters are "D" for the
Developer Rack, "DF" for the Developer/Fixer Crossover, "F" for the Fixer Rack,
and "FW" for the Fixer/Wash Crossover.
[11] Wipe off any chemical deposits in the processing section.
15–6
"DF"
crossover washer
"FW"
H127_0148GCA
crossover washer
H127_0148GA
5B9615