Window Options; Window Width - Kodak Ektascan 2180 User Manual

Window Options

The Window Options Menu is the F1 selection of the Program Menu. It allows the user
to change the window width, level, curve shape, or to print a curve series.
F1 WINDOW WIDTH
F3 CURVE SHAPE
Important
The window options are normally set at the time of installation. At that time, they are
adjusted so that the Laser Printer film output matches the console monitor. Unless the
films no longer match the monitor, do not change them.

Window Width

To change the window width, press:
[Program]
[F1]
[F1]
The system will ask you to enter a window width value.
Note
The valid window width value range is between 1 and 4096.
• The default value is 256.
• Change the window width to 4096 when connecting to a 12-bit digital output
workstation or imaging device.
Note
WINDOW WIDTH ENTRY
WIDTH: 256
Enter a value on the numeric section of the Keypad and, to remain in the Program Mode,
press [E] on the numeric keypad. To specify the value and exit from the Program Mode,
press [Program].
5B9615
Keypad Functions
F2 WINDOW LEVEL
F4 CURVE SERIES
4–15