Storing Images; Setting Formats - Kodak Ektascan 2180 User Manual

User's Manual

Storing Images

[1] Before storing images, check that the desired "Format" and "Program" options are
selected.
[2] To store an image, press a Position Store key or the [Store] bar.
Note
• The default sequence for storing images is from left to right, top to bottom.
• If the Position Store keys are not illuminated for the selected format, use the
[Store] bar to store images.
• A Supply Magazine or Receive Magazine does not have to be present to store an
image.
• You can continue storing or "printing" images even when the Printer is out of film
or in an error condition.

Setting Formats

The procedures for changing options are listed below. The options are changed through
the Keypad.
The Kodak Ektascan 2180 Laser Printer retains the most recently-used format for the
next page.
Sixteen standard formats are available. They are formats 1, 2, 4, 6, 8, 9, 12, 15, 16, 20,
24, 30, 35, and Kodak formats F1, F2, and F3.
The formats that are available depend upon the amount of image memory that is installed
in the Laser Printer, the input image size, the film size, and common text.
[1] To change formats, locate the [Format] display on the Keypad.
[2] Press the [ ] or [ ] arrow keys below the [Format] display until the desired
format number is displayed. The Position Store keys at the left of the Keypad will
light to show the store positions of the format selected.
Formats with more than 4 columns or 6 rows will not be displayed. Formats may only
be changed when no images have been stored on a page.
4–6 5B9615