Procedure
To reach the Main Menu from the initial Terminal Type Menu, enter:
1. [1] and press [Enter].
2. [1] and press [Enter].
3. [n] (the menu number of the imaging device) and press [Enter].
The Main Menu and the name of the imaging device affected will be displayed. The
name of the imaging device affected will be printed on the screen when each of the Main
Menu suboptions are displayed.
1.
Operational Mode
2.
Image Setup
3.
Custom Format
4.
Common Text Setup
5.
Change Control Link
6.
Change Destination
7.
Return to Input Menu
Enter Selection: 1
Note
At start up, the Main Menu has 7 options as listed. After the system is configured, item
number 5 "Change Control Link" is dropped and 6 options remain.
When an option from the Main Menu is selected, press [Enter]. The next screen shows
both the submenu options and, at the bottom of the screen, a list of the Function keys
[F1] through [F10] and what they do. Where more options exist than can be shown on
one list, the [F9] key will be designated as the [Change] key. Pressing [F9] will cause
the remaining available options to be displayed.
5B9615
MAIN MENU
Control Terminal
5–7