Kodak Ektascan 2180 User Manual page 46

User's Manual
Loading Film in the Darkroom
Caution
Be sure to load darkroom film in total darkness. No darkroom lights or safe lights
can be used.
If changing the size of the film, the correct size Carrier Board must be used also. If
necessary, order the correct Carrier Board from Eastman Kodak Company, Service Parts
Management.
35 x 43 cm Carrier Board
35 x 35 cm Carrier Board
11 x 14 in. Carrier Board
8 x 10 in. Carrier Board
To load a film into an empty Supply Magazine:
[1] Make sure you have the proper film for the Magazine.
Note
Smaller films may not be loaded into Magazines that are configured for larger
films.
[2] Place the Magazine and the film package on a clean work table. Position the Supply
Magazine so that the Handle is to your left.
[3] Open the Magazine Lid by lifting the Cover Release Latches on the two front
corners of the Supply Magazine.
[4] Remove the Plastic Carrier Board from the Magazine and place it on the work
table.
[5] Turn off the lights and safelights.
3–20
Part No. 968300
Part No. 968301
Part No. 968302
Part No. 968303
5B9615