Kodak Ektascan 2180 User Manual page 187

Press [F2] to select the Flooded Replenishment Mode when the film usage for the
processor is only 1 or 2 sheets of film during a
added automatically:
• every 5 minutes, achieving a minimum replenishment of 780 mL/hr during the
processor operation.
• when the equivalent film area of 35 x 43 cm has been processed.
Note
Contact your Service Representative for other Flooded Replenishment Mode
requirements.
Press [F3] to fill the Developer and Fix Tanks. While the Tanks are being filled, the Data
Section of the Display Screen displays "Processor Error: E129" (Tanks being filled).
Select [F4] to disable the Replenisher Pumps before doing any of the cleaning
procedures. When the Replenishment Pumps are disabled, the Display Screen shows the
message, "Processor Error: E130", as illustrated on the screen below.
Press [F6] to return to the previous screen.
5B9615
⁄
1
PROCESSOR REPLENISHMENT MODE
Processor Not Ready
Processor Error: E130
Replenishment is Disabled
F1 Select Auto
F2 Select Flooded
F3 Fill Tanks
F4
F6 Return
Select the desired function.
Setting Up the Processor
hour period. Replenishment will be
2
H126_9054AC
13–9