Kodak Ektascan 2180 User Manual page 137

which may be a patient's Social Security number or any unique number. The study
number must be numerical and not exceed 11 characters. The form of the study number
is determined by the hospital and configured by the service provider when the system is
installed.
Study numbers are assigned at the Keypad when the study is stored.
• If the Keypad is in Page Mode, you will be prompted to accept or change the study
number after each page.
• If the Keypad is in Study Mode, each page of the study will have the same number.
With the Keypad Option installed, in addition to date and time and source, you will have
the added convenience of reprinting studies based on the study number. Additionally
you will be able to change the order of the display so that either date and time or study
number displays at the top right of the screen.
To Store a Study Using a Study Number
STUDY NO.:
ENTER FOR # AS SHOWN, OR INPUT NEW #
[1] From the screen shown above, type the study number and press [e]. The following
screen displays.
READY TO STORE IMAGE
[2] Press [Store].
5B9615
Study Reprinting
7–11