Contrast - Kodak Ektascan 2180 User Manual

Contrast

To change the contrast setting, press
[Program]
[F2]
[F4]
[F1]
The system will prompt you to enter the contrast value.
CONTRAST ENTRY
CONTRAST:
Note
The valid range of contrast values is -5 to +5. The + means higher contrast and
the - means lower contrast. The default value is 0. When entering a negative value, press
the minus sign first.
Enter the value and, to remain in the Program Mode, press [E] on the numeric keypad.
To specify the value and exit from the Program Mode, press [Program].
To enter the Reprint Options Menu, press
[Program]
[F3]
Note
See Section 7, "Study Reprinting".
5B9615
0
Keypad Functions
4–23