Kodak Ektascan 2180 User Manual page 10

User's Manual
Cleaning and Sterilization:
The Kodak Ektascan 2180 Laser Printer is not to be cleaned by immersion nor sterilized
by autoclaving. Do not wash in a manner allowing fluid to flow freely over the external
services. To properly sterilize or clean:
• power down the unit.
• immerse a clean, soft cloth in an appropriate non-abrasive, non-corrosive sterilizing
or cleaning solution.
• wring cloth to remove excess fluid.
• wipe the external surfaces free of soil.
Exercise caution around openings and electrical connections. When soil is removed,
wipe external surfaces dry with clean or sterile soft cloth.
Responsibility of the Manufacturer:
The manufacturer is responsible for the effects on safety, reliability, and performance of
the Kodak Ektascan 2180 Laser Printer only if:
• assembly operations, extensions, readjustments, modifications or repairs are carried
out by persons authorized by the manufacturer.
• the electrical installation of the relevant room complies with the appropriate
requirements.
• the Kodak Ektascan 2180 Laser Printer is used in accordance with the instructions
for use.
Note
Please refer to the Kodak Ektascan 2180 Laser Printer and Kodak X-Omat 180 LP or 180
LPS Processor site specifications for installation and site preparation information.
1–6 5B9615