Kodak Ektascan 2180 User Manual page 141

Note
If you enter a date that is invalid, the message "Invalid Date; Please Re-enter" displays.
The "Study# Entry" screen displays.
[6] After you type the date, press [E]. The "Time Selection" screen displays.
[7] Enter [F1] for AM or [F2] for PM. The "Time Entry" screen displays.
[8] Type the time of the study you want to reprint, and press [E].
Note
If you enter a time that is invalid, such as 1269, the message "Invalid Time; Please Re-
Enter" displays.
The message "Study Search in Progress; Please Wait" displays briefly. Then the closest
matching study displays on the screen. Because you selected Date, Time, the date and
time displays first with the study number following it as shown in the example below:
03/23/1995
F1 BACK
From this screen, you may scroll backward [F1] or forward [F2] to find the exact study
you want to reprint, or you may press [F3] to protect the study (see "Protected or
Unprotected Studies", page 7–8.
[9] When the correct study number displays on the screen, press [Print] to print the job.
Reprinting a Study Using Study#
To reprint a study based on the study number, do the following steps.
As an example, we want to reprint a study that was stored as the study number
00123456789.
ENTER STUDY NUMBER:
ENTER FOR # AS SHOWN, OR INPUT NEW#
READY TO STORE IMAGE
5B9615
03:51PM 00123456789
F2 NEXT F3 PROTECT
Study Reprinting
CT3
F4 QUIT
7–15