Kodak Ektascan 2180 User Manual page 166

User's Manual
Warning
DO NOT use an extension cord to power the processor. Connect this equipment to
a grounded outlet. Refer to the Site Specifications for the Kodak Ektascan 2180 Laser
Printer and the Kodak X-Omat 180 LP Processor for additional details.
Warning
This equipment complies with the requirements in part 15 of FCC Rules for a class A
computing device. Operation of this equipment in a residential area may cause
unacceptable interference to radio and TV reception, requiring the operator to take
whatever steps may be necessary to correct the interference.
Responsibility of the Manufacturer
The manufacturer is responsible for the effects on safety, reliability and performance of
the Kodak X-Omat 180 LP or 180 LPS Processor only if:
• assembly operations, extensions, readjustments, modifications or repairs are carried
out by persons authorized by the manufacturer.
• the electrical installation of the relevant room complies with the appropriate
requirements.
• the Kodak Ektascan 2180 Laser Printer is used in accordance with the instructions
for use.
10–2 5B9615