Kodak Ektascan 2180 User Manual page 48

User's Manual
[7] Put the combined film and Plastic Carrier Board into the Supply Magazine as
illustrated below.
Supply Magazine
plastic carrier
board
[8] Close the Magazine Lid by lifting the Release Button on the left-hand side of the
Supply Magazine, lowering the Lid, and pressing on the Magazine Lid until it
latches on both sides.
[9] Return any unused film to its light-tight container, and turn on the darkroom
safelights.
Loading Film into a Partially-Empty Magazine
When loading film into a partially-empty Magazine:
[1] Make sure to turn off all room lights before opening the Magazine Lid.
[2] Place the new film under the old film to rotate the film in the Magazine.
3–22
film
notch
film
H126_0009ACA
H126_0009AA
5B9615