Kodak Ektascan 2180 User Manual page 104

User's Manual
• Change Destination
Used for redirecting inputs (sources) to alternative Kodak Ektascan Laser
Printers on a network. For details of this operation, refer to the User's Guide for
the Kodak Ektascan Network Interface for Laser Printer Interconnect.
Caution
Never press [Set Up] at the top right of the Control Terminal keyboard. This key is used
to reconfigure the Terminal. Pressing it will invalidate the customized installation
default settings for the Control Terminal.
If [Set Up] is accidentally pressed and a menu is displayed, press [Set Up] again to exit
from that menu.
5–4 5B9615