Kodak Ektascan 2180 User Manual page 146

User's Manual
Film Transport with a Kodak X-Omat 180 LP or 180 LPS Processor
The Picker Assembly picks up a piece of film from one of the two Supply Magazines,
and the Elevator lifts the Picker and the film up to the Registration Assembly. The film
is squared on the Registration Table and pushed to the left. The Slow Scan Assembly
moves the film smoothly and holds it in focus while the film is being exposed by a laser.
The laser is located in the Fast Scan Assembly. Next, the piece of unprocessed film goes
down a chute in the Exposed Film Path Assembly and onto the Receive Magazine, or
exits the Laser Printer through the Processor Docking Assembly to the docked
180 LP or 180 LPS Processor.
H126_0708GA
8–4 5B9615