Kodak Ektascan 2180 User Manual page 256

User's Manual
E112 MIS-SORTED FILM AT BIN 2
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
MIS-SORTED FILM AT BIN 3
E113
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E114 MIS-SORTED FILM AT BIN 4
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E115 MIS-SORTED FILM AT BIN 5
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E116 MIS-SORTED FILM AT BIN 6
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E117 MIS-SORTED FILM AT BIN 7
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E118 MIS-SORTED FILM AT BIN 8
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
MIS-SORTED FILM AT BIN 9
E119
Verify correct films in this bin.
If error repeats, remove bin assembly and use bypass tray.
E128 PROC COVER NOT CLOSED
Close processor cover.
W129 PROC TANKS BEING FILLED
No action required.
W130 PROC REPLEN PUMPS DISABLED
From Control Processor, Select Auto or Flooded replenishment.
Films in proc not reprinted.
W132 PROC DEV UNDER SET TEMP
Films in proc not reprinted.
Printing to resume when temp ok.
May override in Control Proc.
W133 PROC DEV OVER SET TEMP
Films in proc not reprinted.
Printing to resume when temp ok.
May override in Control Proc.
18–18 5B9615