Kodak Ektascan 2180 User Manual page 20

User's Manual
Command Section
The following information is provided on the Command Section part of the Display
Screen:
• Up to six commands, consisting of a key label and descriptive text. You may
perform any of the commands that appear on the screen by pressing the appropriate
function key, such as [F1], [F2], or [F3].
• A context-specific prompt to guide you or ask you for input for your next request.
Not all commands are appropriate in all situations. If a command is not appropriate in a
particular situation, it is cleared. When a command is cleared, the descriptive text of the
command is not visible. If a cleared command becomes appropriate again, the Printer
displays the descriptive text line of the command again. In this case, the command is said
to be enabled.
Some commands toggle between two values. For example, in the Control Printer Screen,
command [F1] toggles between "Start Printing" and "Stop Printing."
2–10 5B9615