Curve Shape - Kodak Ektascan 2180 User Manual

Curve Shape

To change the curve shape, press:
[Program]
[F1]
[F3]
The system will ask you to enter a curve shape value.
Note
The valid curve shape value range is between 0 and 6. The default value is 3. In some
cases, the curve shape may be changed if images have already been stored on a page. In
other cases, the curve shape may be changed only when the page is empty. It depends
on how the Printer was configured for your site.
CURVE SHAPE ENTRY
SHAPE: 3
Enter the value and, to remain in the Program Mode, press [E] on the numeric keypad.
To specify the value and exit from the Program Mode, press [Program].
5B9615
Keypad Functions
4–17