Kodak Ektascan 2180 User Manual page 34

User's Manual
Changing Film Size
To change the size of film used, you must
[1] Load the new film into the Supply Magazine.
[2] Insert the Magazine into the Printer.
READY TO STORE IMAGE
[3] Select the new film size at a Keypad. If you are using the autofilming option, you
can select the new film size at the Control Terminal or Auxiliary Keypad.
(a) Press [Select Film] on the Keypad.
Note
The default film size is 35 x 43 cm blue base.
(b) Press [F1] to scroll through the 4 possible film sizes and 2 possible film types.
If a film size is available, the size displays. If it is not available, the display
will show the size and base type and "not present" for that film.
(c) When the desired film size displays, press [F2] to select it.
(d) Store and Print images.
3–8
QUEUE:01
H126_2714BC
5B9615