User's Manual
Calibrate Printer Screen
[1] The screen displays the film type and destination to be calibrated. Press [F1] to
select the other film type that is presently installed in the Printer. This option is
displayed only when two different film types are installed. The film type field will
change to reflect the new film type. [F1] will be cleared if there is only 1 film type.
Press [F2] to change the destination.
[2] Press [F3] to print the Calibration Test Film.
6–6
CALIBRATE PRINTER
Film type: 35 x 43B
To: Receive mag Site 3
Last done: 14-Oct-95 20:37
F1
Change Film Type
F2
Change Destination
F3
Print Calibration Film
F4
Read Calibration Film
F5
Enter Density Data
F6
Return
Select Film Type and Dest; Print
Film; Read Film or Enter Data.
Printing
H126_9041AC
5B9615