User's Manual
[7] Open the Chute Door to check the Chute and Diverter Assemblies for film jams. If
the film is stuck in the rollers, pull it out.
chute
assembly
chute
door
diverter
assembly
Caution
If film has gone partly into the Processor, open the lid of the Processor and pull the film
out through the Processor and not back through the Printer. If the wet film is pulled back
through the Printer, the chemicals will cause damage to the Printer parts.
8–10
3
H126_0726GCA
H126_0726GA
5B9615