Kodak Ektascan 2180 User Manual page 138

User's Manual
Reprint Options
The Reprint Options Menu is the F3 selection of the Program Menu. This menu allows
the user to reprint images that are stored as pages or studies.
F1 STUDY OPTIONS
F3 REPRINT OPTIONS
Study Options
Study Options allows you to set up all sources or a single source for searching for
studies. Once you have set up a single source, only the studies from that source will be
available for display and reprinting. To change the source setting press:
[Program]
[F3]
[F1]
The following screen displays.
CURRENT SETTING:
F1 MANAGE STUDIES FOR CT3, OR ENTER
Press [Enter] to select this setting, or press [F1] to select Manage Studies For CT3 or any
other source. With this setting selected, only the pages or studies from the selected
device can be recalled at the keypad for reprinting. You may change the source selection
at any time.
Note
The use of CT3 is only for example. Your imaging device name will display.
By pressing [F1] again, the screen changes to the one below.
CURRENT SETTING:
F1 MANAGE ALL SOURCES, OR ENTER
Press [Enter] to accept this setting, or press [F1] to select Manage All Sources. With this
setting selected, the pages or studies from all devices connected to the printer can be
recalled at the keypad for reprinting.
7–12
F2 SORTING OPTIONS
F4 UNAVAILABLE
MANAGE ALL SOURCES
MANAGE STUDIES FOR CT3
5B9615