Kodak Ektascan 2180 User Manual page 7

Safety Information for the Kodak Ektascan 2180 Laser Printer
Caution
DO NOT use an extension cord to power the Laser Printer. Connect this equipment
to a grounded outlet. Refer to the Site Specifications for the Kodak Ektascan 2180
Laser Printer and the Kodak X-Omat 180 LP or 180 LPS Processor for additional
details.
This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual, may cause interference
with radio communications. It has been tested and found to be exempt from the
limits for a Class A computing device pursuant to Part 15, Subpart J of FCC Rules,
which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential
environment is likely to cause interference, in which case the user, at the user's own
expense, will be required to take whatever measures may be required to correct the
interference.
5B9615 1–3