Kodak Ektascan 2180 User Manual page 106

User's Manual
[3] Specify that the Terminal is a WYSE terminal or a different type.
1. Kodak Control Terminal (WYSE)
2. Kodak Service Engineering Terminal
Enter Menu Item:1
[4] Specify that the Terminal is to be used for Laser Printer operations rather than
service operations.
1. Laser Printer Operations
2. Service Operations
Enter Menu Item:1
[5] Select which imaging device is to be affected by the Control Terminal operation.
INPUT SELECTION MENU
1. First imaging device
2. Second imaging device
.
.
.
Enter Menu Item:1
Note
The imaging device names shown on the Input Selection Menu are user-specified.
5–6
TERMINAL TYPE MENU
MODE SELECTION MENU
5B9615