Kodak Ektascan 2180 User Manual page 64

User's Manual
Press [F3] to display the Show Actuations by Source Screen. This screen provides the
number of films that were printed from a directly connected imaging device during the
specified time period. The Printer displays actuations by source in alphabetical order.
This screen is not updated in real time. Therefore, as actuations occur, this screen will
not be updated. If you exit and reenter this screen, the actuations count will be updated.
A maximum of three sources can be displayed at one time. The source name is the same
as that found in the Print Queue Screen.
At the Show Actuations by Source Screen, press [F1] to display the previous sources that
have actuations. These sources are the imaging devices. The screen information will
scroll to the left to show the previously displayed information.
At the Show Actuations by Source Screen, press [F2] to display the next sources. The
screen information will scroll to the right to show the next information.
Note
For the Show Previous and Show Next functions, the screen scrolls left to right and right
to left to display the information, rather than up and down.
Read Reference Strip
The [F3] function of the Other Functions Screen will prompt you to slide the Reference
Strip through the built-in Densitometer on the Film Door of the Printer. Maintenance of
the Densitometer and use of the Reference Strip will be discussed in detail in the
Preventive Maintenance section of Section 8.
3–38
SHOW ACTUATIONS BY SOURCE
CT3 MR1
Total: 2230 1129
1995: 1198 1053
1994: 1032
Oct-1995: 89
Sep-1995: 93
F1 Show Previous
F2 Show Next
F6 Return
Select the desired function.
Ready
MR2
1456
1301
76 155
44 88
31 92
H126_9093AC
5B9615