Kodak Ektascan 2180 User Manual page 69

Basic Operations
Press [F1] to select the docked Processor or Receive Magazine function. By pressing
[F1], you highlight either the box to the left of "Docked Processor" or the box to the left
of the "Receive Magazine".
When "Docked Processor" is selected, the Site information in the screen and the [F2]
and [F3] commands are not shown. If no Processor is installed, the Processor line is not
shown.
Press [F2] to select the site above the currently selected site. If you continue to press
[F2], the sites are selected consecutively until the last site. At that point, the first site is
selected, and the cycle continues.
Press [F3] to select the site below the currently selected site. If you continue to press
[F3], the sites are selected consecutively until the last site. At that point, the first site is
selected, and the cycle continues
Press [F6] to return to the previous screen (the screen which you used to get to the Select
Destination Screen)
Assign Processor Sorter Bins
Press [F3] to select Assign Processor Sorter Bins. Refer to Section 17 "Sorter."
Show More Functions
The [F5] function displays the previous screen of Other Functions, as shown at the
beginning of this section.
Return
If you press [F6], you will be returned to the main screen.
5B9615 3–43