Kodak Ektascan 2180 User Manual page 232

User's Manual
There is no limit to the number of Bins assigned for each source. If a Bin is full and no
other Bin is assigned, empty the Bin so that a film jam will not occur. Bin capacity is 50
films.
An "X" below the bin number indicates that the Bin is assigned for the source listed.
To assign or unassign a Bin to a source, use:
• [F1] and/or [F2] to highlight the selection box of the desired source.
• [F3] to highlight the selection box of the desired Bin.
• [F4] to prompt you to unassign the Bin if there is an "X" for the selected source and
Bin pair. If the space below the selected Bin and to the right of the selected source
is blank, [F4] will prompt you to assign the Bin.
• [F5] to select "Sort by Study" or "Sort by Bin".
17–6
ASSIGN PROCESSOR SORTER BINS
Sort by Study
1 2 3 4 5 6 7 8 9
SOURCE:
CT2 X
CT3 X
MR1 X
F1
F2
F3
F4 Unassign Bin
F5 Sort by Bin
F6 Return
Select source and bin number,
then Assign or Unassign Bin.
Ready
X
X
H126_9108AC
5B9615