Kodak Ektascan 2180 User Manual page 260

User's Manual
Border Dmax:
Calibrating:
Cleared:
Common Text:
Control Terminal:
Cubic Convolution:
Cubic Spline:
(Cubic Convolution)
Curve Shape:
Decimation:
Default:
19–2
The Laser Printer specifies the maximum density
of the page for each page. This is called the
Border Dmax because black borders are printed at
this density. The maximum density for an image
on the page is typically the Border Dmax.
A process that compensates for changes in film
emulsions, processor chemistry, or the printing
system to deliver consistent image quality.
Not all commands are appropriate in all situations.
If a command is not appropriate in a particular
situation, the command is cleared.
Text which is printed at the bottom of all films for
a particular imaging device. The text, which
consists of 1 line of up to 80 characters, can
contain the following types of information:
• date when the film was printed
• time when the film was printed
• film count within the study
• any other desired text
The Control Terminal communicates with the
Laser Printer to provide features that are not
available from an autofilming imaging device.
Similar in function to an Auxiliary Keypad.
See Cubic Spline.
A method of interpolation that creates new pixel
values based on a weighted average of the 16
neighboring pixels.
A line or representation of the non-linear monitor
characteristics. The curve shape selection is used
to match the various brightness levels on the
monitor so that images on film match the images
on the monitor.
Decimation reduces the image by decreasing the
number of image pixels. It is mainly used for
producing slides for projection.
A preset value that is automatically assigned to a
field/parameter when no value is specified.
5B9615