Kodak Ektascan 2180 User Manual page 194

User's Manual
[4] Press [F3] at the Processor Setup Screen to display the Processor Setpoints Screen.
The Data Section of the Display Screen shows the setpoints that will be modified by the
[F1], [F2], and [F3] keys. In the above screen example, the line shows "Dev Temp
Setpoint = 95.0F."
Press [F1] to increase the Processor developer or fixer setpoint in increments of
0.1° Celsius (or 0.1° Fahrenheit), or the replenishment volume in increments of 1 mL.
Press [F2] to decrease the Processor developer or fixer setpoint in increments of
0.1° Celsius (or 0.1° Fahrenheit), or the replenishment volume in increments of 1 mL.
Press [F3] to restore the setpoint to the default setting of the Processor.
13–16
PROCESSOR SETPOINTS
Processor Ready
Processor Error: E134
Cycle is Rapid
Replenishment mode is Auto
Dev Temp Setpoint = 95.0F
F1 Increase Setpoint
F2 Decrease Setpoint
F3 Default Setpoint
F4 Next Setpoint
F6 Return
Select the desired action.
H126_9058AC
5B9615