Kodak Ektascan 2180 User Manual page 35

Loading Roomlight Film in the Supply Magazine
Film is stored in one of two Supply Magazines before it is used for printing images. Each
Supply Magazine will accept only one film size at a time. The Supply Magazines
Drawers are marked S1 and S2 to differentiate them from the Receive Magazine Drawer,
which is labeled with an R.
You do not need to remove the Supply Magazine from the Printer in order to load
roomlight film.
Follow these steps to load the roomlight load film in the Supply Magazine:
[1] Check the empty Magazine indicator lights on the front of the Supply Magazine
Drawer or the display on the Control Printer Screen to determine which Supply
Magazine is empty.
[2] Pull out the Drawer of the empty Supply Magazine and open its Lid by lifting the
Cover Release Latches on the 2 front corners of the Supply Magazine until the Lid
latches on the supporting arm.
Supply Magazine
5B9615
Basic Operations
cover
release
latch
H126_0024ACA
H126_0024AA
3–9