Kodak Ektascan 2180 User Manual page 55

Transport Films
The [F3] function displays the Transport Films Screen. The purpose of this function is
to transport films from either Supply Magazine into the Receive Magazine or the docked
Processor. This may be useful to clear fogged films from a Supply Magazine. These
functions take place without exposing the film. The path of the film through the Printer
and Processor is discussed in detail in Section 8.
Press [F1] to select the other Supply Magazine and change the Magazine and film type
fields. If there is only one Supply Magazine in the Printer, this option does not appear.
Press [F2] to display the Select Destination Screen. This option does not appear if the
Processor was not installed at system configuration time.
Press [F3] to increase the number of films in a range of 1 to 99 and "ALL." The key may
be held down in autorepeat mode. "ALL" will transport all films from the selected
Supply Magazine.
Press [F4] to decrease the number of films in a range of 1 to 99 and "ALL." The key may
be held down in autorepeat mode.
Press [F5] to transport the films from the selected Supply Magazine to the selected
destination.
Press [F6] to return to the previous screen.
5B9615
TRANSPORT FILMS
From: Supply 2 8 x 10C
To: Docked Processor
Number of Films: 1
F1 Change Supply Magazine
F2 Change Destination
F3 Increase Number of Films
F4 Decrease Number of Films
F5 Transport Films
F6 Return
Make selections and Transport.
Basic Operations
Not Printing
H126_9033AC
3–29