Vlan Membership Status For Combined Users - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.7.2

VLAN Membership Status for Combined users

This section provides an overview of membership status of VLAN users.
VLAN User
Various internal software modules may use VLAN services to configure VLAN memberships on the
fly.
The drop-down list on the right allows for selecting between showing VLAN memberships as
configured by an administrator (Admin) or as configured by one of these internal software
modules.
The "Combined" entry will show a combination of the administrator and internal software modules
configuration, and basically reflects what is actually configured in hardware
Navigating the VLAN Membership Status page
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the
"entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN
Table. The first displayed will be the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Clicking the
Refresh button will update the displayed table starting from that or the closest next VLAN Table
match.
The >> will use the last entry of the currently displayed VLAN entry as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table.
Use the << button to start over.
Figure 4-28: VLAN Membership Status for Combined Users
Table 4-26: VLAN Membership Status for Combined usersParameters
VLAN ID
VLAN Name
Port Members
VLAN ID for which the Port members are displayed.
VLAN Name for which the Port members are displayed.
A row of check boxes for each port is displayed for each VLAN ID
.
If a port is included in a VLAN, the following image
displayed.
66
.
will be