Synccenter; Sync Source - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.11.1

SyncCenter

Table 4-97: Sync Center parameters
SyncCenter
Input arrows
SyncCenter
Output arrows
Buttons
4.11.2

Sync Source

Figure 4-101: Sync Source display
Table 4-98: Sync Source parameters
Sync Source
Indicates the sync source priority (1 is highest).
Prio
Ena Enable or disable the sync source.
Select the type of sync source. Available options depend on model and may
Type
include: SyncE, PTP, GPS, TDM and External.
Select the port or instance of the selected sync source type. For example: for
Port
SyncE this will be Ethernet port numbers, for PTP the clock instance ID, etc.
The current status of the sync source. When the source provides a valid reference
State
clock, this indicator will be Green. When source is disabled or not applicable,
indicator will be
Indicates the sync source's current (clock) quality (QL) as received from the
Quality
source (e.g. via SSM). When there is no quality indication received from the
source, a default quality value is shown with parentheses.
Visualization of sources feeding the system. A green arrow indicates the
source is currently selected.
The OCXO is the main clock for the Sync Center It will be synchronized to any
input clock
Provides a visual indication of the current system clock status: Green indicates
system is locked to a sync source,
state and Yellow indicates Free-running (internal clock) state.
Visualization of outputs (distributed from the system clock).
Save: Click to save changes
Refresh Click to refresh the page immediately.
Monitor: Direct link to the
Grey.
194
Blue indicates the system is in Holdover
SyncCenter monitoring page.