Qce Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Button
Modification
4.8.11

QCE Configuration

Note: by clicking on the
get the below QCE Configuration display, by means of which we can select the required
QCE Parameters
This section allows to edit/insert a single QoS Control Entry at a time. A QCE consists of several
Parameters. These Parameters vary according to the frame type that you select.
Figure 4-59: QCE Parameters displays
: The lowest plus sign adds a new QCE before the current row.
sign in the previous QoS Control List Configuration display, we
110