Fault Detection Management - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.22.7

Fault Detection Management

This section allows the user to inspect and configure the Fault Management of the current MEP
Instance. By clicking on 'Fault Management" button located in the display
Functional Configuration
you get the following Fault Management Configuration displays:
Loop Back, Link Trace, Test Signal, Client Configuration, AIS, and LOCK. As shown below
Figure 4-187: Fault Management displays
These functions are described in the following paragraphs
4.22.7.1 Ethernet Loop back
Loopback is an on-demand way of fault detection.
325