Loop Guard Status - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Action
Tx Mode
Buttons
4.24.1

Loop Guard Status

This section displays the loop guard status of selected port
Figure 4-209: Loop Guard Status
Port
Action
Transmit
Loops
Status
Loop
Time of Last Loop
Buttons
Table 4-182: Loop Guard Status Parameters
Configures the action performed when a loop is detected on a
port.
Valid values are
Shutdown Port,
Shutdown Port and Log
or Log Only.
Controls whether the port is actively generating loop guard PDU's,
or whether it is just passively looking for looped PDU's.
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to
previously saved values.
The switch port number of the logical port.
The currently configured port action.
The currently configured port transmit mode.
The number of loops detected on this port.
The current loop guard status of the port.
Whether a loop is currently detected on the port.
The time of the last loop event detected.
Refresh: Click to refresh the page immediately.
Auto-refresh : Check this box to enable an automatic
refresh of the page at regular intervals.
350